Movable Trolley Housing Multi Stage 10 Inch Oil Industrial Filtration System with Filters Type 5 Microns Water Bag Housing

Product Description

Movable trolley housing multi stage 10 inch oil industrial filtration system with filters type 5 microns water bag housing. Movable filter is composed of prefilter, oil pump and filtration unit, prefilter for a metal netting,  to prevent the large solid into the pump, oil pump is usually gear pump, to convey the unpurified  oil into the filtration device.The filter device is a small manual compression plate and frame filter press,  using special filter paper as a filter medium. Under the oil pump pressure help, the unpurified oil into the  plate & frame filter press, it will be a pure filter oil after it throughs the filter paper. The solid impurities trapped in the filter paper surface, a small amount of water is absorbed by the wool stoma of filter paper.The filtration  pressure is normal not over 0.3MPa, when there is too much deposition impurity on the filter paper surface,  the filter pressure is increased to 0.35 MPa, or when the moisture of filter paper absorption is close to saturation state, residual moisture in the oil filter no longer falls, it should be replaced the filter paper. When the oil has a  high viscosity,it can be preheating again, in order to reduce the viscosity for reusing.This kind of oil filter machine  can remove the solid impurities and a small amount of water, it is suitable for the general electric oil and  lubricating oil refining.


Related Products:











 

Product name:	Reusable water purification SS 304 316 material single stainless water filter housing bag filter system with water/air pump
Raw material:	SUS304, SUS316L
Filter stage:	1/2/3/4/5/6/7/8 stage, or customized.
Filter elements type:	Filter cartridges, Filter bags.
Inlet & Outlet:	Flange/Thread/Customized
Filtration microns:	1 microns to 100 microns available.
Liquid flow type:	Side Entry; Top Entry.
Seal material:	EPDM/Silicone/Viton/PTFE
Surface treatment:	Polished/Sandblast
Working temperature:	0.5ºF to 380ºF
Min./Max. working pressure:	100psi to 235psi
Housing design pressure:	0.1-2.0Mpa
Pump:	Air/liquid pump, booster pump, wheel pump, air pump, pneumatic pump, etc.
Production time:	7 ~ 15 working days
Movable cart type filter machine spec.:	The configurations only for reference, it is depended on different customers' requirement.  1.SS filter housing 2.Discharge valve 3.Combination valve 4.Pressure gauge 5.Pump 6.Motor 7.Rough filter 8.Magnetic filter 9.In-line filter 10.Flow gauge 11.Electrical apparatus & elements

Customized:
Multi-cartridge filter housing: 




Multi-bag filter housing:




Different models selection: 




OEM customized service are available,
Pls clik below "send" to us your inquiry details. Thank you very much !