Hydrophobic Pes Pleated Filter Cartridge 0.1 0.2 Micron OEM for Pharmaceuticals Final Filtration

• Customization: Available
• Material: PVDF,PP,PTFE,Pes,Nylon OEM
• Application: Industry, Food and Beverage, Medicine, Textile
• Model NO.: LY-XX
• Type: PP Filter
• Filter Connector: 222,226,215, M36, M24, M22, M20 Thread Interface
• Filtration Grade: PRE Filter
• Activated Carbon Filter Type: OEM
• Transport Package: Paper Box
• Specification: customized
• Trademark: customized
• Origin: Guangzhou, China
• HS Code: 8421999000
• Production Capacity: 5000 Pieces/Week

Product Description

General Description
The PES pleated filter cartridge is constructed of imported polyethersulfone(PES) membrane media and non-woven support materials.The material of cage core and end caps are polypropylene. Adapters are thermally welded with media without using any glue, no any pollution. The PES filter cartridge is ideally suited for critical prefiltration in sterilizing applications and final filtration in a broad range of demanding non-sterile application. the inherently hydrophilic membrane contains no surfactant or wetting agents, which results in good filtration anc flow rates. Due to its wide range of PH values and lower adsorption to protein than nylon membrane, it has become the preferred filter cartridge for final filtration in pharmaceutical, food and chemical industries.

Applications
•Pharmaceuticals & biological final filtration.
•Ultra-pure water, chemical raw materials filtration.
•Beer, beverage, mineral water filtration.

Features
•Excellent performance of chemical compatibility.
•High temperature resistance, Acid & Alkali resistance.
•Hydrophilic membrane with high flow
•Non-fiber releasing, it meets the high standard pharmaceutics & food industry requirements.

Specification
•Outer diameter: 2.7"(69mm)
•Length:  9.75" , 10" , 20" , 30" ,40", OEM

Material of constructions
•Filter media:PES
•Support:PP
•Cage/Core/End cap:PP
•Seal Material:Silicone,EPDM,NBR,etc.
•Performance:(10"cartridge)

Technical specifications(10" cartridge)

Item	Technical specification
Pore size	0.1 μm , 0.2 μm, 0.45 μm, 0.65 μm
Retention rate	100%, 10^7CFU/cm^2
Filter area	double layer ≥ 0.5m^2 single layer ≥ 0.6m^2
Max bear pressure	140 ºC, 0.28 Mpa
Max back pressure	△P0.21Mpa 25ºC
Max operating temperature	double layer 85 ºC, 0.21Mpa single layer 85 ºC, 0.05Mpa
sterilizing temperature	121 ºC, 30min
Max differential pressure	△p0.42 Mpa 25 ºC
Water flow rate	△=p0.01Mpa 0.1 μm(SP)≥ 4L/min 0.2 μm(SG)≥ 7L/min  0.45 μm(HE)(HG)≥ 7L/min 0.65 μm(HG)≥ 33L/min
Air flow rate	4M^3/min, 0.13Mpa △ P0.05Mpa