Factory supply replacement Big Blue Cap Big High Flow rate Polypropylene melt blown 5 micron pp filter cartridge for water
Introduction:
The high flow replacement filter cartridge series designed to be used in the different filter housings which contains 1-37 filter cartridges. It can be used for different flow rate request. The large diameter with big filter area insures to reduce the number of filter cartridges and the dimension of housing required.
This Big Flow Rate filter cartridges has various applications on water treatment system. Higher dirt holding capacity and longer service life with further specifications of the large industrial water plant projects.
Most of the raw materials are imported from abroad. Micro Pleated filter element is a kind of deep filtration filter, it is usuaslly used as liquid overheating, clarification, filtration and terminal filter.
Characteristics:
The superfine polypropylene fiber membrane as the filtration medium, low pressure
differential, high flux, good filtration precision, lower economic cost.
The whole structure of polypropylene, end cover, housing and center pole adopts polypropylene material;
It adopts the hot melt welding process, PP and PP melt bonding, without any binder.
It has wide range of chemical compatibility, and also has a series of pore size and form a variety of interface.
Material: Pleated filter, Support layer, End-cover, Inside & Outside cylinder are polypropylene.
Welding: It adopts the uniquehot melting methods, no glue, no foreign body fall off.
Typical use: Pharmaceutical, Food, Chemical, Electronics, Environmental protection, etc.
Microporous membrane pleated filter cartridge main features: High interception rate, high liquidity, low pressure differential and a wide range of chemical compatibility;
The production process adopts unique hot melting process technology, no any adhesive, no foreign body release.
It can meet the food, beverage, beer, chemical, pharmaceutical and other industries production requirements.
Applications:
1. Electronic industry: RO reverse osmosis water system prefiltration, deionized water system prefiltration.
2. Food industry: filtration of beverage, beer and mineral water.
3. Chemical industry: filtration of organic solvent and ink.
4. Pharmaceutical industry: filtration of pharmaceuticals, biologicals, serum products, compressed air and gas.
5. Others: filtration of plating solution, process fluids, photoresist and magnetic media
Specifications:
| Replacement |
P//all filter |
P//arker filter |
3//M filter |
| Length |
20", 40'', 60'' |
40'' |
20", 40'', 60'' |
| Micron Rate |
1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm |
1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm |
1μm,5μm,10μm,15μm,20μm,40μm,70μm,100μm |
| Filter Medium |
Polypropylene, Cellulose, Melt Blown PP |
Polypropylene, Cellulose, Melt Blown PP |
Polypropylene, Cellulose, Melt Blown PP |
| Support |
Polypropylene |
Polypropylene |
Polypropylene |
| End Cap |
Glass Fiber Reinforced Polypropylene |
Glass Fiber Reinforced Polypropylene |
Glass Fiber Reinforced Polypropylene |
| Outer Diameter |
6'', 152mm |
6'', 152mm |
6'', 152mm / 6.5'', 165mm |
| Gasket/O ring material |
EPDM/NBR/Vi/t/-,o/n |
EPDM/NBR/V/it/-,o/n |
EPDM/NBR/V/i/t/-o/n |
| Max. Operating Differential Pressure |
PP: 3.44bar@82°C,50psi@180°F Glass Fiber: 3.44bar@121°C, 50psi@180°F |
PP:3.44bar@82°C,50psi@180°F Glass Fiber: 3.44bar@121°C, 50psi@180°F |
PP:3.44bar@82°C,50psi@180°F Glass Fiber: 3.44bar@121°C, 50psi@180°F |
| Suggestion Flow |
20" 660LPM
40" 1300LPM
60" 1900LPM |
40" 1300LPM |
20" 660LPM
40" 1300LPM
60" 1900LPM |
Related products:
Certifications:
Hi, I am Ms. Suki Su,
if any products draw your interest, pls feel free to contact me.
){kind=link}