General Description
The LY-HFPK filter cartridge series is a replacement cartridges for the depth filtration and 2-1/2" diameter cartridges for the high flow applications. Pre-firation for RO system is an example. The pleated design with high flow area and contamination removal capacity. This design helps end user to reduce capital investment, save space, and easy to change-out and etc. Up to 1300LPM flow rate per filter cartridge reduced the number of filter cartridges and the dimension of the filter housing required. Water treatment volume per super-high flow filter cartridge equals to 10x40" length, 2-1/2" diameter filter cartridges. Inner O-ring insures no by pass and handle design makes the installation easier.
Applications
•Municipal tap water, Prefiltration of RO, Pre treatment of sea water desalination.
•Condensate water filtration, hot water recovery in power generation.
•API, solvents, and water filtration in BioPharm market.
•The filtration of bottled water, high fructose, edible oil, soft drinks and milk.
•Paints and coatings, Petrochemical, refineries, CD/DVD, magnetic media, Petrochemical, Refineries
•Microelectronics, film, fiber and resin.
•Deionized water pre-filtration.
Features
•All contaminants can be removed within the cartridges because of the flow direction.
•Up to 110m%/h flow rate per one filter cartridge for water filtration.
•Max 50% reduction of filter system.
•Handle design quick installation,safe and reduce the cost.
Specification
•Outer diameter: 6"(152mm)
•Length: 20 inch (528mm) 40 inch(1022mm) 60 inch(1538mm)
Material of constructions
•Filter media: Pleated glass fiber, Pleated depth polypropylene, PP melt biown
•Support/Drainage: Polypropylene(PP)
•End cap: Glass fiber reinforced polypropylene
•Seal material: EPDM, NBR, etc
Performance
ITEM |
DETAILS |
Removal rating |
1um,4um,5um,10um,15um,20um,70um,100um |
Maximum Operating Temperature |
Pleated glass fiber: 121ºC
Pleated PP: 82ºC
Melt blown PP: 65ºC |
Maximum Differential Pressure |
Pleated glass fiber: 3.4 Bar at 121ºC
Pleated PP: 3.4 Bar at 82ºC
Melt blown: 1.03 Bar at 65ºC |
Recommended change out differential pressure |
2.4 Bar at 20ºC |
Suggested maximum flow of water |
20 inch: 660LPM
40inch: 1300LPM
60inch: 1900LPM |